TaiZhou Tianguang Printing Lnk Co.,Ltd.

Model B10 economy resin offset plate printing ink

1. Applicable scope:

Model B10 economy is suitable to the fat offset plate printing ink in the single sheet passes on the paper on

each kind of offset press to carry on monochromatic or the polychrome printing,May in the offset paper,Coating paper,

books and periodicals paper and so on prints each kind of color.

2. Printing serviceability:

B10 economy uses the mix classification new resin to the fat offset plate printing ink,Printing ink solvent,Also

medicinal preparation and disperser performance fine senior pigment, Applies the new craft configuration but to on the

becomeHas:Adheres firmly the speed to be quick,The mesh point is clear,The printing shift performance is fine and so

characteristic.

a. Quick to set	b. Brilliant in color	c. Stable in tacking property
d. Bright in tone	e. Good to filming	F. Wide in chromatic range

3.Application method and matters needing attention:

a. This kind of printing ink does not contain the drying agent,When use may right amount increase 2,527 mixes

drying agents or 402 red dry oils according to the climatic conditions,Amount used general control in 1-3%.

a. Quicken drying duration.Mix with 2527 blending drying agent or 402 oil at the consumption of 0-2% before use.

b. Adjust fluidity.Blend with 05-01 or 6# adjuster at the consumption of 0-5% before use.

c. To reduce the viscosity but remain the fluidity.blend with 05-92 thinner at the consumption of 0-5%

d. When the ink is too thick under some circumstance,blend with 52-94 thinner at the consumption of 0-5%.

e. For preparing light tone,blend with 05-93 thinner or 05-90 glossy pulp( or together with these two )

4. Reistance:

Resistance:1-8( weak-strong )other:1-5( weak-strong )

5. Packing: 2.5kg per tin;15kg per iron barrel

6. Shelf Life: 2years( from the production date )